After construction or renovation work, it is essential to clean up the site. Cleaning the tiles in particular can be complicated, as the marks on the joints and the residues of adhesive mortar are very difficult to remove. Calling in a professional is recommended to leave a flawless surface. You can contact Premier Janitorial. They provide the best cleaning services in Puyallup. Here are the steps to clean the tiles at the end of the work.
Tile cleaning
During the work, tiled floors may show stains, residues, or imperfections that will need to be removed. Paris Smart Clean offers tailor-made tile cleaning services. Depending on the type of problem, the team of experts uses different techniques. There are two options for deep cleaning the tiles.
Clean the tiles during installation
First, it is possible to clean the tile as it is laid. This work takes more time but gives good results. After laying a tile, just run a sponge soaked in water over each tile. This technique avoids scratching because the adhesive is still wet, and therefore easy to remove. Rinsing with water is necessary to remove all traces.
Clean the tiles after laying
If the tiles have already been laid, specific products must be used to shine the tiles. To remove cement veils and residues from the joints, the use of certain products may be necessary. There are different products for cleaning tiles: mixture based on hydrochloric acid, black soap, bicarb, etc. to clean the tiles. To be diluted with water, these products allow tiles to shine. The cleaning agents soak a sponge with the mixture and rub off traces and residues of adhesive mortar.
It is also possible to replace this mixture with a cement laitance remover which is intended for use on tiled floors. In this case, it will be necessary to mix one liter of the stripping product with 3 liters of water. This product is used to dislodge cement sails as well as other residues.
Tile cleaning
The last step is to finish cleaning with a steam cleaner to finish cleaning the new tile properly. This professional device will remove all traces of cement and adhesive mortar remaining. It will leave an impeccable finish for a smooth and clean tile. The tiles will then regain their original appearance.
If thin-set mortar has become encrusted between the tiles, giving the tile an unflattering appearance, professionals use a grinder to strip the glue. This way, the residue will disappear, and the joints will be perfect. Here is a video explaining the tips for cleaning the tiles:
How to clean the tiles after painting?
After painting the walls, cleaning the tiled floor is also recommended to remove traces of paint. It is best to cover the floor with a tarp to protect it during painting. Then, it will be necessary to remove the traces of paint which stain the tiles and which will then prove difficult to remove.
As the paint dries quickly, the tile floor should be cleaned immediately after painting the walls. There are two possibilities:
Remove stains with acetone
Acetone is an excellent stripper, and it works relatively quickly. Here’s how to do it: apply a little substance to the streaks, then leave to act for at least 15 minutes. With a scraper, cleaning agents can then remove traces of paint.
Use a cleaning product
There are concentrated cleaners, professional products that can also help remove paint marks. Using a construction sponge, the agents apply the substance to the tiles and act for a few minutes. A rinse and the traces will disappear.